Jump to content

Fairline 40 Flybridge Refit


matthewr

Featured Posts

Well done - its nearly Easter.

Still on plan ?

 

Yes!

 

Finish electrics and nit bits Good Friday weekend. CCTV cameras to fit. Measure for new galley floor and possibly buy/fit if I can get a nice vinyl I like locally.

 

Service and final coat of antifoul the following weekend.

 

Stock up, clean, systems checks and chocks away April 25th!

Edited by matthewr
Link to comment
Share on other sites

So I got a bit more done this weekend. All indoor work as it has been beyond windy and raining constant all weekend!

 

2x LG 22 inch TV's converted to 12v DC...

 

gallery_25882_1380_144235.jpg

 

 

TV brackets in the helm.

 

gallery_25882_1380_142744.jpg

 

 

Lovely!

 

gallery_25882_1380_165568.jpg

 

 

TV even for those boring night passages!

 

gallery_25882_1380_170872.jpg

 

 

Engine bay lights installed. The colour of light makes everything stand out.

 

gallery_25882_1380_99856.jpg

 

gallery_25882_1380_12246.jpg

 

 

 

Also lots more wiring tidied. Macerator pump now wired in and working. Toilet hoses all connected & double clamped to seacocks that were changed the other week.

 

 

 

2 of the HD IP CCTV cameras have been installed. 1 in the engine room and 1 covering the rear "patio doors". There are another 3 or 4 to add when I get to the area they're in.

 

gallery_25882_1380_16722.jpg

Edited by matthewr
  • Greenie 1
Link to comment
Share on other sites

  • 2 weeks later...

Getting there! Only a few more weeks until launch!

 

Garmin radar has arrived along with the mounting bracket. Remaining nav lights and a whole load of safety stuff (life jackets, flares, etc) are here. I need to arrange a dry bag to keep on board.

 

I had the water pump burst for the fresh water tank which was mildly annoying so I have got hold of a SHURflo Aqua King II Supreme 5.0 which appears to have a bit of grunt behind it clapping.gif

 

I'm next on board on the 21st April to finish off ready for launch on the 25th boat.gifcaptain.gifcaptain.gif

Link to comment
Share on other sites

You soon got all that work done. Soon come around a few weeks to go, hope you get us some good pics and maybe a video of the launch if you can.

Hope the weather is good for you for the cruise home, and launch day :)

Link to comment
Share on other sites

  • 3 weeks later...

So where do I start!

 

Picked up at 7am on Monday morning and dropped into the water. Immediately set off from Brixham for fuel.

 

gallery_25882_1380_9102.jpg

 

gallery_25882_1380_135386.jpg

 

gallery_25882_1380_227737.jpg

 

gallery_25882_1380_245982.jpg

 

gallery_25882_1380_100295.jpg

 

gallery_25882_1380_85451.jpg

 

 

After fuelling we then ended up in Poole for the night.

 

 

 

Tuesday's adventures will follow shortly!

Link to comment
Share on other sites

wow !!!

 

That boat of yours has everything.

 

Great job , looking forward to seeing more !

 

No dishwasher...... yet!

 

 

I'm not going to do the kitchen until the summer. I want to get the remainder of the saloon and 2nd bedroom sorted first!

Link to comment
Share on other sites

  • 2 weeks later...

Been so busy with work! Only had a few hours here and there. Have been slowly getting remainder of port side foam backed material off ready for re-carpeting.

 

The GRP repair man has come and looked at some old screw holes and scuffs that need sorting.

 

New floor carpet has arrived but I don't want to fit this until I've finished carpeting port side wall.

 

More pics to follow!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.