markcuk2016

Hi That could be it, thanks for the info

Hi, I have just fitted some new batteries that are sealed and should be charged at 14.4v. Anyway I have set my charger to profile 1 for sealed batteries which should be Sealed Lead acid 14.4 13.6 12.8 but its seems to charge at 14.8 is this correct? does it boost the volts in case of voltage drop etc? solar mt-50 and smartguage seems to think its pumping the full 14.8 into the batteries! Thanks Mark

no worries

some more info in the attachment. edit- noticed its dated 2016 thanks mark 12_New_Islington_Marina.pdf

That's automatic transmission oil! someone will be along in minute to tell you the correct oil to use :-)

Hi, We will be looking for someone to fit a morso squirrel sometime this year, is this something you could do? Thanks Mark

Pepwave max BR1 LTE (a bit expensive?) I'm using ee 4g and a Huawei E5186 LTE with an external antenna

Top guy does a very good job

Thanks for this...exactly what i wanted to do.... If i put a temp gauge on the engine and once it hits the highest temp I could then manually turn on a pump to the radiators?

Will rethink this over the summer... as we are looking to fit a morso 1410 for next winter but may look at the back boiler option and loose a radiator in the lounge (we only have 3) thanks all again

cassette

Thanks for your help

Correct only when the engine is running...the stove is fine for the evening but would like to use the radiators some how since they are there!

Hi There, My eberspacher is playing up again and I would like to use the heat from the engine to heat the radiators and the calorifier instead and bin the eberspacher. My current setup is beta 38 engine - calorifier immersion - calorifier eberspacher - calorifier - radiators I would like to use a heat exchanger and a simple pump I can switch on when I want to use the radiators. I don't want the radiators on all the time when the engine is running just a simple system where i can direct heat to them Thanks Mark

Its been down for over a week now! we looking to use it but will leave it well alone now.

They messed a lot of peoples accounts up! mine was over charged by 1p £14.51pm I had a quick word on online chat and they sorted it,,,told me they had calculated the vat wrong!

Thanks for posting link above, yes will go down to 3g if no 4g signal thanks Mark

just signed up for this rolling 30day contract http://shop.ee.co.uk/cart?discounts=AWDATASIM32&WT.mc_id=ON_MEC_A_AffWin_HotUKDeals&WT.tsrc=Affiliate#voucher_link Cheers Mark

macc canal

Update I had about 4 litres of water taken out after diesel polish. New fuel filters done and injectors emptied of water and it fired up almost on first crank! Not sure if the eber survived being look at this monday Thanks Mark

ok thanks... I will get someone to help me check it out